If you live in the Lakeland area, chances are you have seen those orange-brown streaks creep across a driveway or up the base of a house. The cause is almost always the water we rely on here. A lot of our sprinkler systems and well water carry iron, and where that spray lands on the same spot day after day, the iron oxidizes and leaves rust behind on driveways, walkways, pool decks, and lower walls. It is one of the most common staining problems we see around here, and a regular house wash will not touch it, because rust is not dirt or algae.
Iron staining needs a product built for iron, not a general cleaner. At Cleaner Outlook, we treat rust with F9 BARC, which is formulated specifically for iron and rust staining, and it is applied by a certified applicator.
If rust has settled onto your property, call us at 863-338-6313 and we will take a look.
Rust from irrigation and well water shows up on a lot more than the driveway. We treat it wherever it has taken hold, from the flatwork underfoot to the walls the spray reaches.

This is where most people first notice rust: driveways, walkways, sidewalks, pool decks, and other concrete flatwork. We treat these stains with F9 BARC, and the flatwork gets a surface cleaner and rinse where it needs one. Around here, irrigation overspray drifting onto a driveway or walkway is the single most common source of the flatwork rust we get called about.

Rust does not stop at ground level. When a sprinkler head or iron-rich well water keeps hitting the lower walls and exterior of a home, it stains those surfaces too. We use the same F9 BARC treatment there, adapted for a vertical surface so the product has time to do its work instead of running off before it can lift the iron.
Rust is a problem of its own, and clearing it takes the right product and a bit of detective work. Two things set our rust work apart.

We are a certified applicator of F9 BARC, the rust-removal product this kind of iron staining calls for. Being certified means we apply it correctly for each surface, dialing the treatment to how heavy the staining is and what it sits on.

Rust does not appear out of nowhere, and treating only the surface is why it often returns. Finding the source is what makes the difference between a result that holds up and one that fades fast, so we start there before we treat anything.
It starts with a call or a message through our site. We take a look in person or from your photos, send a free written estimate, and a deposit puts you on the schedule.
With the deposit in, we get you on the calendar. The day before your appointment, you will get an automated text and email with your arrival window and a short checklist of anything worth having ready.
F9 BARC is a strong treatment, so we set up carefully before any of it goes down. We pre-rinse and cover the plants and greenery around the work area and keep the product contained to the area we are treating. Looking after the rest of your property is just part of how we work.
Before we treat, we pin down where the rust is coming from, most often sprinkler overspray or iron in the well water. Knowing the source lets us aim the treatment where it counts and tell you honestly what to expect.
With everything protected, we apply F9 BARC to the stained area and give it time to work on the iron. Then we rinse it clean, running a surface cleaner across flatwork where that evens out the result.
When the work is done, we walk the finished area with you so you can see the difference for yourself. The invoice comes only after you are satisfied with the result, never before.
If something isn’t right, tell us. We’ll drop what we’re doing and make it right. We’re not perfect, but give us the chance and we’ll fix it. That’s our integrity. Our owner, Dane, follows up personally, because a promise like that only means something if someone stands behind it.
If you bring us back for regular exterior work, there is a loyalty benefit worth knowing about. Loyal customers get a 3-year price lock. Your price stays the same, even as costs rise.
Rust removal is its own dedicated treatment, handled separately from a standard wash. Rust needs a product made for it, F9 BARC, and it is priced on its own based on how severe the staining is. If we spot rust while we are on another job, we point it out and give you a separate quote so the choice is yours.
Rust removal is a custom quote, priced by how severe the staining is and what surface it is on. We give a free estimate, usually after a quick look in person or from your photos, because rust varies too much to price accurately without seeing it first.
No, as long as we can get to the area that needs treating. We send reminders before the visit, can share progress photos through a secure link while we work, and follow up with you afterward.
The best way to keep rust from returning is to deal with what is causing it. When the source is an overspraying sprinkler or iron in the water, adjusting the sprinkler or treating the water slows how quickly staining builds back up. We will always give you a straight answer about what to expect for your property.
If rust from your sprinklers or well water has left its mark on your driveway or the walls of your home, we would be glad to help you clear it up. The estimate is free and there is no obligation to book. Call us at 863-338-6313 and we will set up a time to look at the staining and give you an honest quote for treating it.